medium no. 38: modified Linsmaier and Skoog medium, 0.2 mg/L 2,4-dichlorophenoxyacetic acid, 200 mg/L kanamycin, 500 mg/L carbenicillin, 0.4% (w/v) Gelrite, pH 5.8
Plant cell lines
Chemicals and stock solutions
(All stock solutions are stored at 4°C)
MS salt mix
Murashige and Skoog Plant Salt Mixture, FUJIFILM Wako Pure Chemical Corporation (#392-00591)
Sucrose
BY2_P
Chemical
Concentration (mg/mL)
KH2PO4
80
LS_VT_modified
Chemical
Concentration (mg/mL)
Thiamine·HCl
0.4
myo-Inositol
40
2,4-D (0.2 mg/mL)
Chemical
Concentration (mg/mL)
2,4-D sodium monohydrate
0.236
(2,4-Dichlorophenoxy)acetic acid sodium salt monohydrate, Sigma-Aldrich (D6679)
Kanamycin (200 mg/mL)
Chemical
Concentration (mg/mL)
Kanamycin sulfate
200
Sterilize the solution by membrane filtration
Carbenicillin (500 mg/mL)
Chemical
Concentration (mg/mL)
Carbenicillin disodium salt
500
Sterilize the solution by membrane filtration
Gelrite
KOH (1 N)
Medium preparation
Dissolve the following chemicals in approximately 800 mL of distilled water.
Chemical
Amount
MS salt mix
1 bag (1 L)
Sucrose
30 g
Add following stock solutions, and fill up to approximately 950 mL with distilled water.
Stock solution
Volume (mL)
BY2_P
2.5
LS_VT_modified
2.5
2,4-D (0.2 mg/mL)
1
Adjust the pH of the solution to 5.8 with KOH (1 N), and fill up to 1 L with distilled water.
Add 4 g of Gelrite to the medium.
Autoclave the medium at 121°C for 20 min.
Add the following antibiotics to the medium just before agar solidification and swirl the medium gently to mix.
Stock solution
Volume (mL)
Kanamycin (200 mg/mL)
1
Carbenicillin (500 mg/mL)
1
Formulation
Chemical
Concentration (mg/L)
KNO3
1900
NH4NO3
1650
CaCl2·2H2O
440
MgSO4·7H2O
370
KH2PO4
370
H3BO3
6.2
MnSO4·4H2O
22.3
ZnSO4·7H2O
8.6
KI
0.83
Na2MoO4·2H2O
0.25
CuSO4·5H2O
0.025
CoCl2·6H2O
0.025
FeSO4·7H2O
27.8
Na2-EDTA
37.3
Thiamine·HCl
1
myo-Inositol
100
Sucrose
30000
2,4-D sodium monohydrate
0.236
Kanamycin
200
Carbenicillin
500
Gelrite
4000